Liquid Lite Logo: The Underwater Boat Light for All Easy Installation of Liquid Lite™: The Underwater Boat Light 1 Easy Installation of Liquid Lite™: The Underwater Boat Light 2
Easy Installation of Liquid Lite™: The Underwater Boat Light 3 Easy Installation of Liquid Lite™: The Underwater Boat Light 4 Easy Installation of Liquid Lite™: The Underwater Boat Light 5
Liquid Lite: Homepage for the True Underwater Boat Light
Everything You Need to Know About The Liquid Lite: The Underwater Boat Light Now
Top 10 Reasons Why You Need Liquid Lite: The Underwater Boat Light
Current Testomonials By Customers Using The Liquid Lite: The Underwater Boat Light
Contact Tojo Sea Below About Your Liquid Lite, Your Underwater Boat Light Today
Become A Liquid Lite Dealer and Sell The Underwater Boat Light Today
Buy Your Liquid Lite: The Underwater Boat Light Today
Installing the Liquid Lite®

Liquid Lite®, the underwater boat light, is design to be installed quickly and easily. And, you won't have to drill additional holes in your transom.

Remove and Save Drain Plug/underwater boat light pic Easy Installation of the underwater boat light pic The Liquid Lite: The Underwater Boat Light pic Easy to Drain and Remove of The Liquid Lite: The Underwater Boat Light pic

To install:

  1. Run the cable leads thru the garboard drain opening and screw the underwater boat light assembly into the existing garboard fitting. The Liquid Lite® fitting is 1/2" NPT. Please make sure the cable is loose in the blige.

  2. Connect the Liquid Lite® six-foot cable to a 12 VDC on/off switch.

  3. Attach the red lead to Positive (+) and the black lead to the Negative (-)

Typical installation time from start to finish should be around 30 minutes.

IMPORTANT: When ordering, be sure to know the style and size of your garboard drain fitting. This is necessary to ensure the Liquid Lite® assembly will fit and function correctly in your boat.

Contact Tojo Sea Below if you have any underwater boat light questions or need help.

Safety Precautions:

  1. Never look directly into the Liquid Lite® LED's when the light is turned on. They are very bright.

  2. Never remove the underwater boat light assembly while the boat is in the water.

  3. Always check and make sure the Liquid Lite® assembly is hand tight in the garboard fitting before launching your boat.

  4. Turn power off before removing the underwater boat light assembly.

  5. Make sure when the Liquid Lite® is installed that it does not extend below the bottom of your boat.

  6. Call 561-575-5559 if you have any Liquid Lite® problems with the installation procedure or need any technical information.

 

ToJo Sea Below the makers of The Liquid Lite: The Underwater Boat Light for All